Lasers & NDT : Publications

PUBLICATIONS 2017

 

  •    Y. Zhao, R. Zemmamouche, J. Vandenrijt, M. P. Georges, "Accuracy improvement in    digital holographic-based speckle correlation for three-dimensional (3D) displacement    measurement," in Digital Holography and Three-Dimensional Imaging, OSA Technical    Digest (online) (Optical Society of America, 2017), paper Th1A.5.

 

  •    Zhao Y, Zemmamouche R, Vandenrijt J-F, Georges P. M. "Accuracy concerns in digital    speckle photography combined with digital holographic interferometry" Optics and    Lasers in Engineering, 2017.

 

  •    F. Landini, C. Baccani, S. Vives, S. Fineschi, M. Romoli, G. Capobianco, G. Massone, M.    Casti, A. Bemporad, M. Focardi, M. Pancrazzi, D. Loreggia, V. Noce, A. Jody Corso, C.    Thizy, E. Renotte, B. MarquetTest plan for the PROBA3 / ASPIICS scaled model    measurement campaign”, in SPIE Optics and Photonics Conference 2017.
  •    Kokkinos D., Schroeder H., Fleury-Frenette K., Georges M., Riede W., Tzeremes G.,    Rochus P.Laser optics in space failure risk due to laser induced contamination”, CEAS    Space Journal, Vol. 8, 2017.

 

  •    Languy F., Vandenrijt J-F, Saint-Georges P., Georges M.Deformation measurements    by ESPI of the surface of a heated mirror and comparison with numerical model”,    Proceedings of SPIE Vol. 10329, 2017.

 

  •    Vandenrijt J-F, Languy F., Thizy C., Georges M.Nondestructive inspection of    aerospace composites by a fiber-coupled laser ultrasonic system”, Proceedings of SPIE,    5th International Conference on Optical and Photonics Engineering, 2017.

 

  •    Vandenrijt J-F, Languy F., Walter J., Brouillette T., Perrard A., Georges M. « Ultrasons    par laser pour l’inspection de matériaux composites. Comparaison entre génération à 532    nm et 10,6µm. Effet de la géométrie du faisceau de génération », Colloque francophone    CMOI-FLUVISU 2017.

 

  •    Vandenrijt J-F, Languy F., Thizy C., Rochet J., Loffet C., Simon D., Georges M.    « Interférométrie de speckle à 10.6µm et shearographie à 532 nm en temps réel moyenné    et décalage de phase. Comparaison et application pour identification des modes de    vibration sur shaker industriel », Colloque francophone CMOI-FLUVISU 2017.

 

  • Georges M. « Contrôle non destructif champ complet. Techniques et applications », ENSIM – Université du Maine, Le Mans, Colloque Francophone CMOI-FLUVISU 2017.

 

  • Georges M. « Thermal infrared and terahertz digital holography and their applications », School of Holography, Coherent Optics and Photonics, Kaliningrad, Russie 2017.

 

 

PUBLICATIONS 2016

  • Languy F., Vandenrijt J-F, Thizy C., Rochet J., Loffet C., Simon D., Georges M. « Vibration mode shapes visualization in industrial environment by real-time averaged phase stepped electronic speckle pattern interferometry at 10.6 µm and shearography at 532 nm”, Optical Engineering, Vol. 55, n° 12, 2016. 
  • Languy F., Vandenrijt J-F, Thizy C., Rochet J., Loffet C., Simon D., Georges M. « Vibration mode shapes visualization in industrial environment by real-time averaged phase stepped electronic speckle pattern interferometry at 10.6 µm and shearography at 532 nm”, Optical Engineering, Vol. 55, n° 12, 2016.
  •  Georges M. “Photorefractives for holographic interferometry and nondestructive testing” in Photorefractive Organic Materials and Applications”, Springer Series in Materials Science, Vol. 240, pp 283-312, 2016. 
  • Georges M. “Les techniques optiques et laser pour la mesure des déplacements et le contrôle non destructif », Cours 2016. 
  • Georges M., Denis S., Joannes L. “L’optique spatiale en Wallonie : de la genèse aux développements récents”, Conférence Questions d’Optique : Science, Technique et Applications, Université Catholique de Louvain 2016. 
  • Georges M., Vandenrijt J-F, Languy F., Thizy C. “Holographie numérique en infrarouge lointain – Applications aérospatiales”, 4ème rencontre francophone d’holographie numérique appliquée à la métrologie des fluides (Holophi 4), Lille 2016. 
  • Languy F., Perrard A., Vandenrijt J-F, Georges M. “Laser ultrasound for NDT: investigation of the generation beam shape”, 5th International Symposium on Laser-Ultrasonics and Advanced Sensing, Linz, Austria 2016. 
  • Languy F., Vandenrijt J-F, Thizy C., Rochet J., Loffet C., Simon D., Georges M. « Vibration mode shapes visualization in industrial environment by real-time averaged phase stepped electronic speckle pattern interferometry at 10.6m and shearography at 532 nm”, Optical Engineering, Vol. 55, n° 12, 2016. 
  • Frejlich J., de Oliveira I., de Araujo W.R., Carvalho J.F., Georges M., Fleury-Frenette K. “Photoconductivity and photoconversion at a photorefractive thin crystal plate”, Optical Materials, Vol. 55, pp 160-163, 2016. 
  • Vandenrijt J-F, Thizy C., Martin L., Beaumont F., Garcia J., Fabron C., Prieto E., Maciaszek T., Georges M. “Digital holographic interferometry in the long-wave infrared and temporal phase unwrapping for measuring large deformations and rigid body motions of segmented space detector in cryogenic test (invited paper)”, Optical Engineering, Vol. 55, n° 12, p 1723, 2016. 
  • Mendoza S., Georges M., Lehmann P., Osten W., Albertazzi A. “Speckle metrology”, Optical Engineering, Vol. 55, n° 12, p 121701, 2016. 
  • Georges M. “Non-contact emerging nondestructive techniques for aerospace composite inspection”, NDT Innovation Day, CFK Valley Belgium, Leuven 17 Nov 2016. 
  • Georges M., Thizy C., Languy F., Vandenrijt J-F “An overview of interferometric metrology and NDT techniques and applications for the aerospace industry”, Proceedings of SPIE Vol. 9960, p 996007, 2016. 
  • Vandenrijt J-F, Walter J., Brouillette T., Georges M. “Performances comparison of a laser ultrasonic system using 10.6 µm infrared or 532 nm visible generation beam for the investigation of CFRP”, 5th International Symposium on Laser-Ultrasonics and Advanced Sensing, Austria 2016. 
  • Georges M. “Thermography VS holographic techniques for nondestructive testing of composites : similarities, differences and potential cross-fertilization”, International conference on processes in combined optical and imaging methods applied to mechanical engineering, Ascona, Switzerland 2016.
  • Focardi M., Thizy C., Renotte E. “The shadow position sensors (SPS) formation flying metrology” Proceedings of SPIE, SPIE astronomical telescopes and instrumentation, Edinburgh 2016. 
  • Lorregia D., Thizy C., Renotte E. “Characterization of the ASPIICS/OPSE metrology sub-system and PSF centroiding procedure”, Proceedings of SPIE Astronomical telescopes and instrumentation, Edinburgh 2016. 
  • Baccani C., Thizy C., Renotte E. “Preliminary evaluation of the di raction behind the PROBA 3/ASPIICS optimized occulter”, Proceedings of SPIE Astronomical telescopes and instrumentation, Edinburgh 2016. 
  • Capobianco G., Thizy C., Renotte E. “The satellite formation flying in lab: PROBA-3 / ASPIICS metrology”, Proceedings of SPIE Astronomical telescopes and instrumentation, Edinburgh 2016.

  

  

 PUBLICATIONS 2015

 

  • Hayasaki Y., Liu J-P, Georges M. “Feature issue of digital holography and 3D imaging (DH): introduction”, Applied Optics, Vol. 54, n° 1 (2015). 
  • Georges M. “Long-wave infrared digital holography”, New techniques in digital holography, ISTE Science Publishing, pp 219-254,2015. 
  • Georges M. “Infrared holographic interferometry for metrology of space payloads and NDI by optical laser techniques for aeronautical composites”, Innovative diagnostics techniques for polymers and composites, Pozzuoli, Italy, 25 February 2015. 
  • Vandenrijt J-F, Thizy C., Beaumont F., Garcia J., Martin L., Fabron C., Prieto E., Maciaszek T., Georges M. “Long-wave infrared digital holographic interferometry for deformation measurement of the segmented detector array of the space EUCLID mission”, OSA Technical Digest, DTh3A.1, 2015. 
  • Georges M.,“Speckle interferometry in the long-wave infrared for combining holography and thermography in a single sensor. Applications to nondestructive testing: the FANTOM project”, Proceedings of SPIE Vol. 9525, 95251L, 2015. 
  • Vandenrijt J-F, Simar JF, Thizy C., Georges M. “Development of a full fiber-coupled laser ultrasound robotic system using two-wave mixing 1064 nm detection and 532 nm YAG generation”, 4th International Symposium on Laser Ultrasonics and Advanced Sensing, 2015. 
  • Zemmamouche R., Vandenrijt J-F, Medjahed A., De Oliveira I., Georges M., “Use of specklegrams background terms for speckle photography combined with phase-shifting electronic speckle pattern interferometry”, Optical Engineering, Vol. 54, n° 8, 084110, 2015. 
  • Vandenrijt J-F, Thizy C., Georges M. “Time-averaged phase-stepped ESPI with CO2 laser and shearography in the visible for identification of vibration mode shapes”, Speckle 2015, 6th International Conference on Speckle Metrology, SPIE Vol. 9660, 2015. 
  • Georges M. “Comparison between thermographic and holographic techniques for nondestructive testing of composites: similarities, differences and potential cross-fertilization”, Proceedings of SPIE Vol. 9660, 2015. 
  • Vandenrijt J-F, Thizy C., Beaumont F., Garcia J., Martin L., Fabron C., Prieto E., Maciaszek T., Georges M. “Combination of temporal phase unwrapping and long-wave infrared digital holographic interferometry for metrology of mosaic detector under space simulated conditions”, Speckle 2015, 6th International Conference on Speckle Metrology, Proceedings of SPIE Vol. 9660, 2015. 
  • Georges M., Thizy C. “Photorefractive holographic camera for monitoring deformations of MEMS”, Journal of Micro/Nanolithography, MEMS and MOEMS, Vol. 14, n° 4, 041301, 2015. 
  • Vandenrijt J-F, Kokkinos D., Languy F., Thizy C., Simar JP, Georges M. “Système entièrement fibré et robotisé pour la génération d’ultrasons par laser à 532 nm et la détection par mixage d’ondes à 1064 nm”, 14ème colloque international francophone sur les méthodes et techniques optiques pour l’industrie, Pleumer-Bodou, France, 2015. 
  • Languy F., Vandenrijt J-F, Georges M. “Mesures de déformation par ESPI de la surface d’un miroir chauffé et comparaison avec simulations numériques”, 14ème colloque international francophone sur les méthodes et techniques optiques pour l’industrie, Pleumer-Bodou, France, 2015. 
  • Fernandes H., Georges M., Crabus G., Ibarra-Castanedo C., Maldague X. « Comparison of active thermography techniques for the inspection and defect characterisation of carbon fiber composites », 23rd ABCM International Congress of Mechanical Engineering, Rio de Janeiro, Brasil, 2015. 
  • Focardi M., Bemporad A., Buckley S., O’Neill K., Fineschi S., Noce V., Pancrazzi M., Landini F., Baccani C., Capobianco G., Romili M., Loreggia D., Nicolini G., Massone G., Thizy C.,Servaye J-S, Renotte E. “Formation flying metrology for the ESA-PROBA 3 mission : the Shadow Position Sensors (SPS) Silicon Photomultipliers (SiPMs) readout electronics”, Proceedings SPIE Volume 9604 Solar Physics and Space Weather Instrumentation VI, 2015. 
  • Loreggia D., Bemporad A., Capobianco G., Fineschi S., Focardi M., Landini F., Massone G., Nicolini G., Pancrazzi M., Romoli M., Cernica I., Purica M., Thizy C., Renotte E., Servaye J-S “OPSE metrology system onboard of the PROBA 3 mission of ESA”, Proc. SPIE Volume 9604 Solar Physics and Space Weather Instrumentation VI, 2015. 
  • Landini F., Bemporad A., Focardi M., Fineschi S., Romoli M., Pancrazzi M., Baccani C., Capobianco G., Loreggia D., Nicolini G., Massone G., Noce V., Thizy C., Servaye J-S, RenotteE. “Significance of the occulter diffraction for the PROBA 3 / ASPIICS formation flight metrology”, Proc. SPIE Volume 9604 Solar Physics and Space Weather Instrumentation VI, 2015.

 

 PUBLICATIONS 2014 

  • Frejlich J., De Oliveira I., Carvalho J., Araujo W., Georges M., Thizy C. “Photoelectric conversion effect in non-photovoltaic photorefractive materials”, Latin America Optics &Photonics Conference (LAOP) – OSA Technical Digest, 2014. 
  • Georges M., Vandenrijt J-F, Thizy C., Alexeenko I., Pedrini G., Rochet J., Vollheim B., Jorge I., Venegas P., Lopez I., Osten W., “Simultaneous temperature and deformations measurements using long-wave infrared speckle interferometry : a novel hybrid technique for industrial nondestructive testing”, Fringe 2013, 7th International Workshop on AdvancedOptical Imaging and Metrology, W. Osten (ed), Springer Verlag, pp 917-920, 2014. 
  • Georges M., Vandenrijt J.F., Thizy C., Alexeenko I., Pedrini G., Vollheim B., Lopez I., Jorge I., Rochet J., Osten W. “Combined holography and thermography in a single sensor through image-plane holography at thermal infrared wavelengths”, Optics Express, Vol. 22, issue 21, 25517-25529, 2014. 
  • Georges M. “Infrared Holography”, Invited conference at the MiviM chair of the Université Laval, Québec, April 2014. 
  • Georges M., Vandenrijt J-F, Thizy C., Alexeenko I., Pedrini G., Rochet J., Vollheim B., Jorge I., Osten W. “Speckle interferometry at 10 micrometers wavelength : a combined thermography and interferometry technique and its application in aeronautical nondestructive testing”, SPIE Proceedings of Interferometry XVII : Advanced Applications, 17-21 August 2014. 
  • Vandenrijt J-F, Thizy C., Stockman Y., Queeckers P., Dubois F., Doyle D., Georges M., “Digital holographic interferometry in the long-wave infrared for the testing of large aspheric space reflectors”, Fringe 2013, 7th International Workshop on Advanced OpticalImaging and Metrology, W. Osten (ed), Springer Verlag, pp 921-924, 2014. 
  • Vandenrijt J-F, Thizy C., Georges M. “Vibration analysis by speckle interferometry with CO2 lasers and microbolometers arrays”, OSA Technical Digest, Optical Society of America, Imaging and Applied Optics 2014.
  • Vandenrijt J-F, Thizy C., Queeckers P., Dubois F., Doyle D., Georges M. “Long-wave infrared digital holographic interferometry with diffuser or point source illuminations for measuring deformations of aspheric mirrors”, Optical Engineering, Vol. 53, n° 11, 112309, 2014. 
  • Vandenrijt J-F, Georges M., “Automated defect detection algorithm applied to shearography in composites”, Fringe 2013, 7th International Workshop on Advanced OpticalImaging and Metrology, W. Osten (ed), Springer Verlag, pp 237-240, 2014. 
  • Vandenrijt J-F, Lièvre N., Georges M. “Improvement of defect detection in shearography by using Principal Component Analysis”, SPIE Proceedings of Conference on Interferometry XVII : Techniques and Analysis, 17-19 August 2014.

 

  

 

 PUBLICATIONS 2013

 

  • Georges M., Vandenrijt J-F, Thizy C., Stockman Y., Queeckers P., Dubois F., Doyle D.,“Digital holographic interferometry with CO2 lasers and diffuse illumination applied to large space reflectors metrology”, Applied Optics, 52, 1, A102-A116, 2013. 
  • Alexeenko I., Vandenrijt J-F, Pedrini G., Thizy C., Vollheim B., Osten W., Georges M. “Nondestructive testing by using long wave infrared interferometric techniques with CO2 lasers and microbolometer arrays”, Applied Optics, 52, 1, A57-A67, 2013. 
  • Georges M., Lewandowski J. “Evaluation de technologies émergentes pour le contrôle non-destructif de composites aéronautiques », Colloque Aérotechnique 2013 : innovations et perspectives, Canada, 2013. 
  • Georges M., “Tests non-destructifs (NDT) pour structures en matériaux composites”, Workshop sur les tests non-destructifs (NDT) pour structures en matériaux composites, 28 février 2013. 
  • Thizy C., Eliot F., Olympio K.R., Kluge R., Shannon A., Laduree G., Logut D., Georges M. “Holographic interferometry based on photorefractive crystal to measure 3D thermo-elastic distortion of composite structures and comparison with finite elements models”, Proc. SPIE Vol. 8788 on Optical Measurement Systems for Industrial Inspection VIII, 2013. 
  • Georges M., Vandenrijt J-F, Thizy C., Queeckers P., Dubois F., Doyle D. “Digital holographic interferometry with CO2 lasers applied to aspheric space reflectors testing”, Conference on Digital Holography and 3D Imaging, Optical Society of America, 21-25/04/13. 
  • Dubé R., Scheed L., Lewandowski J., Mouret L., Georges M. “Comparison of three NDT techniques for the inspection of aeronautic composite structures”, 19th International Conference on Composite Materials, 28 july-2 August 2013. 
  • Vandenrijt J-F, Thizy C., Alexeenko I., Pedrini G., Rochet J., Vollheim B., Jorge I., Venegas P., Lopez I., Osten W., Georges M. “Mobile speckle interferometer in the long-wave infrared for aeronautical nondestructive testing in field conditions”, Optical Engineering, Vol. 52, 10, 2013. 
  • Georges M., “Comparison of 3 emerging optical NDI techniques on complex shaped composite structures based on carbon fiber”, Aerodatings, Octobre 2013. 
  • Jorge I., Venegas P., Vega L., Lopez I., Vollheim B., Krausz L., Georges M. “Review of thermal imaging systems in composite defect detection”, Infrared Physics & Technology, Vol. 61, pp 167-175, 2013. 
  • Georges M., Thizy C., Lewandowski J., Scheed L., Mouret L., Dubé R., Venegas P., Jorge I., Lopez I., Demy P., “Comparaison de techniques CND émergentes sur des pieces aéronautiques en matériaux composites”, 13ème colloque international francophone sur les méthodes et techniques optiques pour l’industrie CMOI, Société Française d’Optique (SFO), 2013. 
  • Vandenrijt J-F, Georges M., “Détection automatisée de défauts dans les matériaux composites par shearographie”, Méthodes et Techniques Optiques pour l’Industrie, 18-22 Novembre 2013.

 

 

 

PUBLICATIONS 2012

  • Garcia Parejo, P., Alvarez-Herrero A., Uribe-Patarroyo N., Lopez Heredero R., Restrepo R., Georges M., “UV radiation effects on liquid crystal variable retarders for aerospace applications”, 24th International Liquid Crystal Conference, 2012.
  • Georges M., Vandenrijt J-F, Thizy C., Alexeenko I., Pedrini G., Osten W. “Speckle interferometry at 10µm with CO2 lasers microbolometers array”, Proceedings of the Society of Photo-Optical Instrumentation Engineers, SPIE Vol. 8412, 2012.
  • Georges M., Vandenrijt J-F, Thizy C., Dubois F., Queeckers P., Doyle D., Pedrini G., Alexeenko I., Osten W. “Digital holographic interferometry and ESPI at long infared wavelengths with CO2 laser”, Digital Holography and 3D Imaging (Conference), Optical Society of America, 2012.
  • Loicq J., Stockman Y., Georges M., Venancio L-M “Investigation on high efficiency volume Bragg gratings performances for spectrometry in space environment”, International Conference on Space Optics 8, ICSO 2012.
  • Thizy C., Eliot F., Ballhause D., Laduree G., Logut D. “3D thermo-elastic distortion measurements on OSIRIS SiC hardware by holographic interferometry and correlation with finite element models”, European Conference on Spacecraft Structures, Materials and Environmental Testing, ESA 2012.
  • Vandenrijt J-F, Thizy C., Georges M., Queeckers P., Dubois F., Doyle D. “Long-wave infrared digital holography for the qualification of large space reflectors”, International Conference on Space Optics, ICSO 2012.
  • Vandenrijt J-F, Thizy C., Queeckers P., Dubois F., Doyle D., Georges M. “Digital holography at long-wave infrared for measuring the deformation of large space reflectors under thermal vacuum”, European Conference on Spacecraft Structures, Materials and Environmental testing, ESA 2012.

 

 

PUBLICATIONS 2011

  • Georges M. “Using holography to reduce aircraft costs”, Projects Magazine (2011), 26, 66-67.
  • Georges M., “Metrology and Non Destructive Testing by Holography at the Space Center of Liege. From research to industrial applications”, Invited Seminar at the Institute of Physics Gleb Wathagin, Brésil 2011.
  • Georges M., “LIBS : Identification rapide de composants chimiques. Application au recyclage des matériaux et détection de pollution du sol », Colloque Optique et Environnement, Les Isnes 2011.
  • Georges M. « Mesures LASER », Cours organisé par PROMOPTICA donné dans le cadre de Technifutur, Centre Spatial de Liège 2011.
  • Georges M. « FANTOM FP7 Project: Innovative NDT Technique Development. Single sensor for simultaneous temporal and spatial full-field thermography and deformation measurements in structural tests », Conference Aerospace Testing, 5-6 April 2011, Hamburg, Germany.
  • Georges M., “FANTOM Project Overview”, Aerodays 2011 : Innovation for a Sustainable Aviation in a Global Environment. 30 March 2011- 1 April 2011, Madrid, Spain.
  • Georges M., Thizy C., Vandenrijt J-F, Alexeenko I., Pedrini G., Osten W., Aldave I., Lopez I., Saez de Ocariz I., Vollheim B., Dammass G., Krausz M., “Electronic speckle pattern interferometry at thermal infrared wavelengths : a new technique for combining temperature and displacement measurements”, Photomechanics 2011 : An International conference on full-field measurement techniques, 7-9 Février 2011, Vrije Universiteit Brussel.
  • Vandenrijt J-F, Thizy C., Georges M., Queeckers P., Dubois F., Doyle D. “Holographie digitale en infrarouge lointain en vue de la mesure de déformation de grands réflecteurs spatiaux en ambiance vide-thermique”, 12ème Colloque International Francophone sur les méthodes et techniques optiques pour l’industrie et du 14ème congrès français de visualisation et de traitement d’images en mécanique des fluides CMOI., Lille 2011.

 

 

For older publications see in ORBi

 

<- Back


Contact(s) : Marc Georges mgeorges@ulg.ac.be